# Custom > Custom Architectural Lighting & OEM Manufacturing TPK Lighting supports contractors, distributors and project partners who need architectural lighting beyond a standard fixture. We review structure, optics, electrical configuration and OEM branding around the project environment, target market and certification route. For international projects, we provide ## Source - Canonical: [https://www.tpk-led.com/custom/](https://www.tpk-led.com/custom/) - Content type: Pages - Language: en - Published: 2026-09-11T08:37:48+00:00 - Modified: 2026-10-16T07:05:24+00:00 ## Content # Custom Architectural Lighting & OEM Manufacturing TPK Lighting supports contractors, distributors and project partners who need architectural lighting beyond a standard fixture. We review structure, optics, electrical configuration and OEM branding around the project environment, target market and certification route. For international projects, we provide product supply, control solution support and technical coordination. If a standard product is already the better route, we will recommend it directly. [Submit requirement](#submit) **24+**Years in architectural lighting manufacturing **4**Core customisation dimensions **8–10**Typical weeks from brief to first delivery **50+**Typical MOQ for simple modifications ## What we customise Most custom architectural lighting projects involve two or more of these areas. 01 · Housing & structure ### Form, finish & mounting Used when the fixture must match facade material, bridge railing conditions or non-standard installation spaces. - RAL powder coat - Custom length - Bracket design - Cable entry - Flush or surface mounting 02 · Optical design ### Light distribution & effect Used when the surface effect, throw distance or glare control cannot be met by a standard optic. - Beam angle change - Asymmetric optic - Elliptical beam - Anti-glare louvre - Custom CCT 03 · Electrical & control ### Power, dimming & protocol Used when the project needs a different wattage, voltage or control logic to match the system architecture. - 12V / 24V / 48V - 100–277VAC - DMX512 - DALI-2 - 0-10V / PWM 04 · OEM & branding ### Your brand, our manufacturing Used by distributors and lighting brands that need reliable OEM architectural lighting manufacturing in China. - Product label - Laser marking - Custom packaging - Branded spec sheets - NDA available ## From requirement brief to delivered product Timelines vary by complexity, certification scope and quantity. Day 1–3 ### Requirement review Send the application, target market, quantity estimate, installation condition and any drawings or photos you already have. Day 3–8 ### Technical feasibility proposal We confirm what can be modified, which base product is suitable, the likely MOQ range, indicative pricing and the development route. Day 8–30 ### Sample production and evaluation Samples are produced for visual, structural and functional review before mass production. Optical effect, finish detail and control behaviour are verified here. Day 30–60 ### Mass production After sample approval, production starts under the agreed specification with electrical testing, optical verification, aging test and project-specific packing preparation. Week 8–10 ### Delivery and after-sales coordination Products are delivered under agreed terms, with documentation and technical follow-up support for installation or commissioning coordination where required. ## Project types that usually need custom review When installation conditions, control architecture or brand requirements go beyond a catalogue model. [![Building facade architectural lighting custom application by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/pages/Solutions/Solutions_07.jpg)](https://www.tpk-led.com/solutions/building-facade-lighting-solutions/) Facade / building envelope ### [Facade lighting](https://www.tpk-led.com/solutions/building-facade-lighting-solutions/) Special beam angles, custom housing colours, concealed mounting or glare control for building surfaces. [![Bridge lighting custom DMX and mounting application by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/navigation_bar/nav_common_004_111d0280.jpg)](https://www.tpk-led.com/solutions/bridge-lighting-solutions/) Bridge / infrastructure ### [Bridge lighting](https://www.tpk-led.com/solutions/bridge-lighting-solutions/) Long-distance DMX, railing brackets, anti-corrosion materials and installation constraints. [![Landmark RGBW custom lighting application by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/navigation_bar/nav_common_003_2c002462.jpg)](https://www.tpk-led.com/solutions/landmark-cultural-lighting-solutions/) Landmark / public space ### [Landmark lighting](https://www.tpk-led.com/solutions/landmark-cultural-lighting-solutions/) RGBW scenes, custom optics, wiring constraints and documentation for project approval. [![OEM architectural lighting manufacturing and packaging by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/pages/Solutions/Solutions_06.jpg)](#submit) Distributor / OEM ### Private label supply Branding, packaging, technical documents and product-line continuity for channel partners. ## Custom solutions in real projects Reference projects showing wall washer, linear light, control and mounting adjustments on bridge, facade and landmark lighting. [View global projects](https://www.tpk-led.com/projects/) [![Fujiang Bridge custom DMX lighting project in Mianyang China by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/navigation_bar/nav_common_004_111d0280.jpg) Electrical & control customisation ### Fujiang Bridge — custom DMX long-distance system Mianyang, China · Bridge lighting · Signal transmission and mounting coordination.](https://www.tpk-led.com/projects/mianyang-fujiang-bridge/) [![Turkmenistan Tower custom RGBW landmark lighting project by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/navigation_bar/nav_common_003_2c002462.jpg) Optical & electrical ### Turkmenistan Tower Custom RGBW star-base landmark lighting.](https://www.tpk-led.com/projects/turkmenistan-landmark-tower/) [![Jinyun Historic District custom flush-mount wall washer project by TPK Lighting](https://static.tpk-led.com/images/website/tpk-led/navigation_bar/nav_common_043_76dd8f31.jpg) Housing & optics ### Jinyun Historic District Flush-mount lens custom for urban renewal lighting.](https://www.tpk-led.com/projects/jinyun-old-town-waterfront-renovation/) ## Capability specifications for custom LED lighting These are typical reference ranges, not hard limits. Final feasibility depends on the selected base model, project environment and certification scope. Structure ### Housing & structural modifications Housing coloursAny RAL number, standard and special finishes Finish typesMatt, satin, textured, metallic Linear light lengthsCustom from 200 mm to 2000 mm Wall washer size rangeTypically within ±30% of base model dimensions Bracket materialsAluminium or 316 stainless steel IP directionIP65 / IP67 / IP68 by design route Optics ### Optical modifications Beam angle range5° to 120° depending on product family Distribution typesSymmetric, asymmetric, elliptical and special layouts CRI optionsCRI 80 / 90 / 95+ on request Colour temperature2200 K to 6500 K, including custom CCT route MacAdam step≤3 SDCM standard, tighter control on request Anti-glare optionsFrosted lens, louvre, flush lens, honeycomb and shield variants Control ### Electrical & control modifications Input voltageAC 100–277V or DC 12V / 24V / 48V Wattage variantsCustom intermediate power levels by feasibility review Dimming protocolsDMX512, DALI-2, 0-10V, PWM, Triac Channel logicStandard and custom RGBW mapping Long-run DMXSignal conditioning planning for extended cable distance Driver directionSelected to match environment, control and efficiency needs OEM ### OEM and production terms MOQ — colour changeTypically 50–100 units MOQ — structural changeTypically 100–200 units MOQ — full OEMTypically 200+ units Sample lead timeUsually 15–20 working days Production lead timeUsually 20–30 working days after approval NDAAvailable on request before detailed development discussion ## FAQ for custom architectural lighting Questions commonly raised by engineering teams, distributors and OEM buyers before a custom fixture is developed. TPK can customise housing and bracket structure, optical distribution, electrical or control configuration and OEM branding. Many projects combine more than one of these dimensions. Simple colour or label changes often start from 50–100 units. Structural modifications usually require 100–200 units. Full OEM architectural lighting projects generally start from around 200 units or above. A typical route includes requirement review, feasibility proposal, sample production, approval and mass production. Many projects take roughly 8–10 weeks from first brief to first delivery. In many cases, yes. The exact route depends on whether the custom change affects the certified structure or electrical system, so this should be reviewed during the proposal stage. See also [certifications](https://www.tpk-led.com/certifications/). Yes. We support OEM architectural lighting production with custom labels, packaging and technical documents. NDA discussion and exclusivity scope can be handled before detailed development work starts. Send the product type, target application, what needs to change, target market, certification requirement, quantity estimate, timeline and any photos or drawings of the installation condition. ### Useful next steps [Standard products](https://www.tpk-led.com/products/) [Lighting solutions](https://www.tpk-led.com/solutions/) [WhatsApp engineering](https://wa.me/8618024224161?text=Hi%20TPK%2C%20I%20want%20to%20check%20whether%20my%20custom%20lighting%20requirement%20is%20feasible.) ## Tell us what your project needs For custom LED wall washer, linear light, spotlight, floodlight and control-related enquiries. Submit prepares an email draft to ES2@topkinglite.com. Before you submit ### A rough brief is enough for first review. Send the requirement even if it is still early stage. A note such as “black RAL wall washer for bridge project in Europe, ETL or CE to be confirmed” is enough to start the first review. - Application or project type - Base product or product family - What needs to change - Target market and certification direction - Quantity estimate and timeline - Drawings, photos or reference specifications if available Email engineering [Email TPK Email TPK](mailto:ES2@topkinglite.com) ## Not every project needs custom development If a standard product can already meet the beam angle, mounting and control requirement, that route is usually faster and more cost-efficient. We recommend comparing both paths before confirming development scope. [Products ### Browse standard products Check whether an existing wall washer, linear light or spotlight already fits the project.](https://www.tpk-led.com/products/) [Resources ### View technical resources Review catalogues, specifications and reference materials before locking the direction.](https://www.tpk-led.com/resources/) [Engineering advice ### Ask which route is better Tell us the application and quantity. We will advise whether custom or standard is the right direction.](https://wa.me/8618024224161?text=Hi%20TPK%2C%20I%20want%20advice%20on%20whether%20I%20need%20a%20custom%20solution%20or%20a%20standard%20product.) Overview ## Discovery - Site index: [https://www.tpk-led.com/llms.txt](https://www.tpk-led.com/llms.txt) - Section index: [https://www.tpk-led.com/llms.txt](https://www.tpk-led.com/llms.txt)